Service Tel: +86-18957021129 
PRODUCTS
Product introduction: This product is made of fluorocarbon resin, high-quality pigments, fillers, BYK and other excellent additives, and reflective insulation materials. It is a two-component reactive coating with Bayer curing agent to form a film. It can effectively prevent the base surface from being damaged by various corrosive media and prolong the service life of the coated object.
Uses: It is suitable for packaging containers of various refrigerants, solvents and low boiling points in chemical enterprises, which can greatly reduce the cost of heat preservation and protect the equipment as new for a long time.
Features: This is a functional anti-corrosion coating with dual functions of anti-corrosion and heat insulation specially developed for special media equipment that chemical companies need to take cooling measures. Through its reflection function of infrared rays, it can achieve the effect of surface cooling. The rate reached over 86%. In the state of steel equipment without medium, the surface temperature of the equipment in summer generally does not exceed 42 degrees, and the effect is very obvious.
Construction method: deployment in strict proportion. First mix the curing agent and the paint thoroughly and cure for 15 minutes, then add the thinner. In the production process of this product, special consideration is given to the construction requirements, so it can be painted by brush, spray or roller. The surface coating is constructed with a special anti-corrosion primer. The general process is one base and two sides or two bases and two sides. This product is a two-component reactive coating, which should be used within 4 hours after mixing.
Drying time: temperature 25 ℃, surface dry 30 minutes, hard dry 24 hours. Fully cured for 5-7 days.
Coating interval: more than 4 hours.
Storage: Cap tightly sealed. Store in a cool, clean, dry place. The shelf life is 2 years.
Surface treatment: remove floating rust and welding slag spatter on the surface of the workpiece, and carry out dust and oil removal.
Construction conditions: The humidity during construction is less than 75%, and the construction temperature is 5°C-40°C. Construction is strictly prohibited in rainy, snowy and foggy weather.
Safety and Precautions: Ensure that the construction site has good ventilation. Keep away from open flames, no smoking at the construction site, and avoid paint splashing on eyes and skin.
|
min |
std |
Sample 1 |
Temperature difference |
min |
std |
Sample 1 |
Temperature difference |
|---|---|---|---|---|---|---|---|
|
0 |
17.1 |
16.9 |
0.2 |
0 |
14.9 |
14.8 |
0.1 |
|
1 |
33.1 |
22.4 |
10.7 |
1 |
26.3 |
19.8 |
6.5 |
|
2 |
40 |
24.8 |
15.2 |
2 |
39.3 |
24.2 |
15.1 |
|
3 |
50.9 |
29.2 |
21.7 |
3 |
49.6 |
28.6 |
21 |
|
4 |
57.8 |
32 |
25.8 |
4 |
57.5 |
32.3 |
25.2 |
|
5 |
63.5 |
34.6 |
28.9 |
5 |
64.3 |
35.6 |
28.7 |
|
6 |
68.7 |
37.2 |
31.5 |
6 |
68.8 |
38.1 |
30.7 |
|
7 |
71.7 |
39 |
32.7 |
7 |
71.9 |
39.9 |
32 |
|
8 |
74.6 |
40.8 |
33.8 |
8 |
74.3 |
41.5 |
32.8 |
|
9 |
75.8 |
41.8 |
34 |
9 |
76.2 |
42.8 |
33.4 |
|
10 |
77.8 |
42.7 |
35.1 |
10 |
77.9 |
43.9 |
34 |
|
25 |
82.2 |
46.5 |
35.7 |
12 |
80 |
45.6 |
34.4 |
|
28 |
82.5 |
47.1 |
35.4 |
17 |
82.2 |
47.4 |
34.8 |
|
33 |
82.6 |
47.4 |
35.2 |
43 |
83.6 |
49.3 |
34.3 |
|
surface temperature |
90.9 |
52.4 |
38.5 |
surface temperature |
90.7 |
53.9 |
36.8 |
|
90.7 |
53.2 |
37.5 |
90.4 |
54.2 |
36.2 |
||
|
89.4 |
52.6 |
36.8 |
90.9 |
53.6 |
37.3 |
Surface temperature difference comparison table of the coated object
Supporting primer: anti-corrosion special primer
